Sensors and transmitters TECFLUID LE, LP, LT, LTDR, LU, etc.

Mechanical level sensors Tecfluid LE
- Works with liquids of various resistance
- The blade system is driven by the magnetic field of the duct

• Mechanical level sensors of the LE level. Technical specifications.

Mechanical level sensors made of metal Tecfluid LP
- Suitable for high pressure, temperature loads, chemically resistant

• Mechanical level sensors made of metal LP. Technical specifications.

Mechanical level sensors made of metal Tecfluid LT
- The measurement is carried out through the interaction of an internal float magnet and an external display system, which ensures the complete absence of possible leaks
- Simple design
- Resistance to adverse temperature and pressure conditions

• Mechanical level sensors made of metal LT. Technical specifications.

Tecfluid LTDR Radar Level Sensors
- Provides continuous, high-precision and reliable level measurement for almost all liquids and most solids
- Uses an innovative method of signal analysis and interference suppression
- Has exceptional performance, especially for liquids with a low dielectric constant, which allows the device to be used for environments with changing properties

• LTDR radar level sensors. Technical specifications (eng).

Ultrasonic level sensors Tecfluid LU
- Designed to measure the level with a depth of up to 30 meters for liquids and up to 7 meters for solids
- Measurements have no effect on technological processes
- Distance calculation is carried out using a microprocessor and powerful intelligent software

• Ultrasonic level sensors LU. Technical specifications (eng).

Tecfluid IBT-32 Level Sensors
- A simple transparent PVC construction is used
- Direct and reliable reading
- There is no direct contact between the liquid and the external display system, which ensures complete sealing without the possible risk of leaks
- Excellent chemical and mechanical resistance

• IBT-32 level sensors. Technical specifications (eng).

Tecfluid IMN TB level Sensors
- Based on switching reed contacts located inside the guide tube and driven by a permanent magnet built into the float
- Simple, reliable and economical system
- Used for liquids with a density of up to 0.55
- IP67 housing with 350° rotatable

• IMN TB INOX level sensors. Technical specifications (eng).
• IMN TB PVDF level sensors. Technical specifications (eng).

Tecfluid IMN TBM INOX Level Sensors
- Based on switching reed contacts located inside the guide tube and driven by a permanent magnet built into the float
- Simple, reliable and economical system
- Used for liquids with a density of - up to 0.71
- IP67 housing with 350° rotatable

• IMN TBM INOX level sensors. Technical specifications (eng).

Tecfluid LS level sensors
- Has good resistance to extreme temperatures and pressure
- A simple design is used
- There is no risk of leakage

• LS level sensors. Technical specifications (eng).

Multipoint level sensors Tecfluid MPS
- Has chemical and mechanical resistance
- There is an electronic remote display unit with programmable relay outputs of 4-20 mA

• Multipoint MPS level sensors. Technical specifications (eng).

Tecfluid NCPR TB / NCPRI TB Resistive Level Sensors
- A compact and very reliable system is used
- Has a built-in amplifier with one or two detection points
- It is possible to select the output state of the relay contacts in order to adapt it to the characteristics of the installation

• Resistive level sensors NCPR TB, NCPRI TB. Technical specifications (eng).

Tecfluid NRC / NTBA / NTBI / NB Resistive Level sensors
- Used for conductive liquids, 1-5 detection points
- Compact and very durable, no moving parts and with minimal maintenance

• Resistive level sensors NRC, NTBA, NTBI, NB. Technical specifications (eng).

Tecfluid NR / NRA Resistive level sensors
- Used for conductive liquids, 1 or 3 detection points
- Compact and very durable, no moving parts and with minimal maintenance

• Resistive level sensors NR, NRA. Technical specifications (eng).

Capacitive level sensors Tecfluid SCAV TB
- It is used for liquids and solids with a built-in amplifier
- Has a strong construction, materials, resistant to aggressive products

• Resistive level sensors NR, NRA. Technical specifications (eng).

Capacitive level sensors Tecfluid SCR / SCRR
- Designed to determine the level of grain, powder, peanuts, chemical products, etc
- Work with DNAS/DNAT amplifier relays to monitor the maximum and/or minimum level

• Capacitive level sensors SCR, SCRR. Technical specifications (eng).

Level sensors with variable resistance Tecfluid TMN 300 TB
- Suitable for use in high-pressure boilers, for storage of toxic products, level measurement in marine transport, in tanks measuring auxiliary containers for food and textile equipment

• Level sensors with variable resistance TMN 300 TB. Technical specifications (eng).

Tecfluid TPSM hydrostatic Pressure level Sensors
- Used to measure the hydrostatic pressure of liquids
- Made of stainless fabric or with ceramic membrane
- Has a high resistance to work in an aggressive environment, bad weather

• TPSM hydrostatic pressure level sensors. Technical specifications (eng).

Tecfluid VAT level sensors
- A simple transparent PVC construction is used
- Has a direct reading level, PVC shut-off valves for quick and easy removal of the tube
- Excellent chemical and mechanical resistance

• VAT level sensors. Technical specifications (eng).

Questionnaire