Secondary devices TECFLUID APTM44, CH, CI, CP, etc.

Pulse amplifiers for TM44 Tecfluid APTM44 flowmeters
- Designed to avoid the problem of electrical interference in installations where the turbine is located at a great distance from the electronic control equipment
- Generates very low level pulses
- Converts the pulses from the turbine sensor into two TTL level signals that do not match in phase

• APTM44 pulse amplifiers. Technical specifications (eng).

Flow meter converters Tecfluid CH420 / CH420P
- Designed to work with flowmeters of the COVOL series
- UV-resistant

• Flow meter converters CH420 / CH420P. Technical specifications (eng).

Tecfluid CI-420 Frequency Converters
- Designed for microprocessor-based control, mounted on a rail for frequency conversion to analog format
- Fully user-programmable and will adapt directly to any TM-44 turbine, COVOL output or equivalent pulse-generating output converters

• Frequency converters CI-420. Technical specifications (eng).

Pulse counters programmable by Tecfluid CIP
- Designed to work with conventional anTecfluid volume meters (Covol) and turbines
- Powered by a battery and does not require the connection of any wires, this makes its installation very simple

• CIP pulse counters. Technical specifications (eng).

Summation counters programmable by Tecfluid CIP2
- Designed to work with conventional Tecfluid volume meters (Covol) and turbines
- Has two volume adders, one of which can be reset (partially), and the other, which cannot be reset (completely)

• Counters for summing CIP2 pulses. Technical specifications (eng).

Flow meter Converters Tecfluid CP420L / CH420L
- Designed to work with conventional Tecfluid volume meters (Covol) and turbines
- The devices are supplied already configured for this type of input
- The CH420L differs from the CP420L in that it is also compatible with the HART protocol

• Flow meter converters CP420L / CH420L. Technical specifications (eng).

Flow meter converters Tecfluid CP420LT
- CP transmitter with LCD display for TM turbine flowmeters and piston-ring COVOL

• CP420LT flow meter converters. Technical specifications.

Flow meter converters Tecfluid CP420R / CH420R
- They are DIN-rail modules designed to work with Tecfluid volume meters (COVOL) and turbines
- Supplied already configured for this type of input
- The CH420R differs from the CP420R in that it is also compatible with the HART protocol

• Flow meter converters CP420R / CH420R. Technical specifications (eng).

Tecfluid DFD frequency Converters
- Designed for frequency separation based on microprocessors, mounted on a rail
- Fully user-programmable and will adapt directly to any TM-44 turbine, COVOL output or equivalent pulse-generating output converters

• DFD frequency converters. Technical specifications (eng).

Tecfluid DFD420 Frequency Converters
- Used for flow applications
- Fully programmable via USB cable using Tecfluid SA Winsmeter DFD420 software
- Compatible with COVOL and TM series flowmeters

• Frequency converters DFD420. Technical specifications (eng).

Relay amplifiers for capacitive sensors Tecfluid DNA / PNA
- PNAS-PNAT / DNAS-DNAT amplifiers are designed for capacitive SCR/SCRR sensors
- Simple and economical device
- Wide range of supply voltages from 24 / 110 / 220 / 400

• DNA/ PNA frequency converters. Technical specifications (eng).

Converters of electromagnetic flowmeters Tecfluid MBC1
- Autonomous converters for electromagnetic flowmeters Flomid, Flomat
- Designed for measuring conductive liquids > 20 microns/cm

• Converters for electromagnetic flowmeters MBC1. Technical specifications (eng).

Electronic converters Tecfluid MC-01
- Designed for mounting on the flow control and dosing panel
- Fully user-programmable and adaptable to any TM-44 turbine, COVOL output or equivalent pulse generating converters

• MC-01 electronic converters. Technical specifications (eng).

Electronic converters Tecfluid MT-02
- Designed for mounting on the dosing control panel
- Fully user-programmable and adaptable to any TM-44 turbine, COVOL output or equivalent pulse generating converters

• Electronic converters MT-02. Technical specifications (eng).

Electronic converters Tecfluid MT-03
- Designed to measure flow and level
- Programmed with a USB cable using Tecfluid S.A.
- Compatible with COVOL and TM series flowmeters , as well as with other pulse sensors

• Electronic converters MT-03. Technical specifications (eng).

Flowmeter Converters Tecfluid MX4
- Designed for measuring the volume flow and volume of electrically conductive liquids with a medium conductivity of at least 20 microns /cm
- Provide the formation of pulse signals

• MX4 flow meter converters. Technical specifications.

Flowmeter converters Tecfluid TR3420
- Designed to measure flow and level
- Fully programmable via USB cable using Tecfluid

• TR3420 flow meter converters. Technical specifications (eng).

Electromagnetic converters Tecfluid XL1
- Designed for measuring conductive liquids > 20 microns/cm
- Converters for electromagnetic flowmeters Flomid, Flomat

• Electromagnetic converters XL1. Technical specifications (eng).

Flowmeter Converters Tecfluid XT5
- Designed for measuring the volume flow and volume of electrically conductive liquids with a medium conductivity of at least 20 microns /cm.

• Flow meter converters XT5. Technical specifications.